Australian Door Market Statistics 2026: Trends, Materials and Renovation Data

Key Statistics Summary

• Australia had approximately 10.85 million private dwellings at the 2021 Census, according to the Australian Bureau of Statistics (ABS). Every completed dwelling requires entrance and internal doors, making housing stock an important indicator of potential demand.
• Separate houses represented 70 per cent of occupied private dwellings at the 2021 Census, while semi-detached and townhouse properties represented 13 per cent and flats or apartments represented 16 per cent, according to the ABS.
• Australia entered the Housing Australia Future Fund period with a national target of 1.2 million new homes over the five years from July 2024, according to Housing Australia.
• Housing Australia's 2025 State of the Housing System report projected that approximately 938,000 homes would be built during that five-year period, leaving a projected shortfall of approximately 262,000 against the national target.
• The 2024 Houzz & Home Australia study reported median renovation spending of $40,000 during 2023, according to Houzz Research. This is a whole-project benchmark, not an average amount spent on doors.
• Approximately 9.8 million Australian households shopped online during 2024 and spent $69 billion online, according to the Australia Post 2025 eCommerce Report.
• New homes covered by the National Construction Code's updated residential energy provisions generally need to reach the equivalent of a 7-star NatHERS rating, subject to state and territory adoption arrangements, according to the Australian Building Codes Board.
• The NSW Rural Fire Service identifies six Bushfire Attack Level categories under the AS 3959 framework, ranging from BAL-LOW to BAL-FZ. These classifications can directly affect the specification of external doors, glazing, seals and hardware in bushfire-prone areas.

Australian door market statistics at a glance

Indicator	Published benchmark	What it means for the door market	Source
Australian private dwellings	Approximately 10.85 million in 2021	Indicates the size of the installed residential door base	[ABS 2021 Census QuickStats](https://www.abs.gov.au/census/find-census-data/quickstats/2021/AUS)
Separate houses	70% of occupied private dwellings in 2021	Detached housing remains the largest residential application	[ABS housing data](https://www.abs.gov.au/statistics/people/housing/housing-census/latest-release)
National new-home target	1.2 million homes over five years from July 2024	Establishes the headline housing pipeline affecting future door demand	[Housing Australia](https://www.housingaustralia.gov.au/research-data-analytics/state-housing-system)
Projected delivery against target	Approximately 938,000 homes	Suggests a substantial pipeline, despite construction falling short of the target	[Housing Australia 2025 State of the Housing System](https://www.housingaustralia.gov.au/research-data-analytics/state-housing-system)
Median renovation spend	$40,000 in 2023	Provides a whole-project renovation benchmark, not a door-only average	[2024 Houzz & Home Australia study](https://www.houzz.com.au/research)
Households shopping online	Approximately 9.8 million in 2024	Supports the growing relevance of online product research and ordering	[Australia Post 2025 eCommerce Report](https://auspost.com.au/business/marketing-and-communications/access-data-and-insights/ecommerce-trends)
Residential energy benchmark	Equivalent to 7 NatHERS stars for new homes covered by updated provisions	Increases attention on external door systems, seals and glazing performance	[Australian Building Codes Board](https://ncc.abcb.gov.au/editions/ncc-2022/adopted/volume-two/h-energy-efficiency)

Introduction

If you're renovating a heritage home, specifying doors for a new subdivision or replacing a hot west-facing entry, the first challenge is finding reliable Australian door market statistics. Doors play a significant role in architecture, security, energy performance and street appeal, but public data rarely isolates doors from broader building products. Market figures are often grouped under door and window manufacturing, joinery, hardware, alterations or total construction activity. We've created this simple guide to help you understand what the available evidence says, and where the evidence still has gaps.

This 2026 reference brings together housing, renovation, e-commerce, construction and building regulation data from Australian government agencies and recognised industry sources. It is intended for builders, architects, manufacturers, retailers, renovators, researchers and journalists. Rather than manufacture precise-looking material shares or sales totals, the report distinguishes published statistics from market interpretation. That distinction is essential when analysing Australian door market statistics.

Market Size, Housing Stock and Construction Pipeline

The value of Australia's door market cannot be calculated reliably from a single free public dataset. IBISWorld publishes a commercial report covering door and window manufacturing in Australia, but its industry classification combines multiple product groups. A combined industry value should not be presented as a door-only market value without access to the report's underlying segmentation. According to IBISWorld Australia, the relevant industry includes manufacturers of doors and windows made from materials such as wood and metal.

For a transparent public benchmark, housing stock and construction activity are more useful:

• According to the ABS 2021 Census, Australia contained approximately 10.85 million private dwellings. This represents the existing residential base in which doors may be installed, repaired or replaced.
• According to the ABS housing release, 70 per cent of occupied private dwellings were separate houses at the 2021 Census. Detached homes generally contain more external access points and more internal rooms than compact apartments, although layouts vary.
• The same ABS release reported that semi-detached, row, terrace and townhouse dwellings accounted for 13 per cent of occupied private dwellings, while flats and apartments accounted for 16 per cent.
• According to Housing Australia, the national housing policy target covers 1.2 million homes over the five years beginning in July 2024.
• Housing Australia's 2025 State of the Housing System report forecast approximately 938,000 new homes during the target period. That projection is approximately 262,000 below the national target, but it still represents a considerable potential flow of entrance doors, internal doors, sliding systems and associated hardware.
• The ABS Building Approvals release publishes monthly dwelling approvals by building type and jurisdiction. These figures are leading indicators, not completed-door sales, because approved projects can be delayed, changed or abandoned.

Australian housing structure benchmarks

Occupied dwelling characteristic	Share at the 2021 Census	Door-market relevance	Source
Separate house	70%	Largest residential application group, with entrance, internal and often secondary external doors	[ABS housing data](https://www.abs.gov.au/statistics/people/housing/housing-census/latest-release)
Semi-detached, row, terrace or townhouse	13%	Relevant to medium-density developments and space-conscious door configurations	[ABS housing data](https://www.abs.gov.au/statistics/people/housing/housing-census/latest-release)
Flat or apartment	16%	Relevant to fire-rated entries, acoustic performance and compact internal layouts	[ABS housing data](https://www.abs.gov.au/statistics/people/housing/housing-census/latest-release)
Owned outright	31%	Indicates a substantial owner-occupier base capable of initiating replacement projects	[ABS 2021 Census QuickStats](https://www.abs.gov.au/census/find-census-data/quickstats/2021/AUS)
Owned with a mortgage	35%	Connects door demand with purchase, extension and improvement cycles	[ABS 2021 Census QuickStats](https://www.abs.gov.au/census/find-census-data/quickstats/2021/AUS)
Rented	31%	Supports maintenance and replacement demand from landlords and housing providers	[ABS 2021 Census QuickStats](https://www.abs.gov.au/census/find-census-data/quickstats/2021/AUS)

The ABS also publishes quarterly construction commencements, work completed and dwelling completions through its Building Activity release. Completions are usually a closer proxy for installed door demand than approvals because doors tend to be ordered during the later stages of a build.

Researchers should nevertheless avoid applying one assumed number of doors to every completed dwelling. A studio apartment, a multi-bedroom detached home and an accessible housing project can have very different schedules. Fire separation, wardrobes, laundries, garages and outdoor living areas also affect the number and type of openings.

Residential and Commercial Door Demand

No Australian government series reports national residential door sales or commercial door sales as standalone monthly totals. The strongest public indicators are therefore dwelling completions, non-residential construction activity, renovation expenditure and the size of the existing building stock.

• According to the ABS Building Activity publication, residential construction is divided into houses and other residential buildings. This distinction matters because door schedules differ substantially between detached houses and apartments.
• According to the ABS Building Approvals publication, approval data are available by state and territory. These jurisdictional figures provide a defensible basis for monitoring where future residential demand may emerge.
• The national target of 1.2 million homes over five years from July 2024, published by Housing Australia, implies an average policy ambition of 240,000 homes for each full year of the target period. This is a target-derived annual average, not a forecast of actual completions.
• Housing Australia's forecast of approximately 938,000 completions over the same period equates to roughly 187,600 homes for each full year when expressed as a simple five-year average. Actual annual output will not be evenly distributed.
• Commercial demand is influenced by offices, education buildings, health facilities, accommodation, retail premises, warehouses and public infrastructure. The ABS records these projects in broader non-residential construction categories rather than as door sales.

Residential door demand can be separated conceptually into new-build demand and replacement demand. New-build demand follows commencements and completions. Replacement demand follows the age and condition of existing buildings, renovation budgets, weather exposure, security concerns and changes to household layouts.

Commercial procurement is usually more specification-led. Relevant variables include fire resistance, smoke control, accessibility, acoustic ratings, opening force, durability, hardware compatibility and maintenance requirements. This makes a simple unit-sales comparison between residential and commercial products potentially misleading.

Public datasets also do not reveal whether a door was supplied as a slab, pre-hung set, complete entrance system or part of a broader glazing package. Researchers comparing sales figures need to check the product definition used by each source before combining results.

Door Material Popularity in Australia

Claims that timber, aluminium or composite products hold a precise national percentage of Australian door sales should be treated cautiously. No freely accessible Australian statistical series identified for this report publishes a complete national material-share split for door sales in 2026.

The available evidence supports analysis of use cases rather than unsupported rankings:

• Timber remains an established material for entrance and internal applications, particularly where appearance, traditional detailing, staining or heritage character are priorities. However, timber performance depends on correct finishing, installation, weather protection and maintenance.
• Aluminium is prominent in exposed entrance systems and glazed sliding or folding configurations because dimensional stability and lower routine maintenance can be useful in demanding conditions.
• Composite and engineered door constructions are used where manufacturers need to combine surface appearance with stability, insulation, moisture resistance or other performance characteristics.
• Steel is relevant to security, fire, industrial and some residential entrance applications, although it is often omitted from simplified timber-versus-aluminium comparisons.
• Glass is normally part of a door system rather than the sole structural material. Its selection is affected by safety, energy, privacy, security and bushfire requirements.

The practical lesson is that material popularity varies by application. Internal doors are commonly evaluated differently from fully exposed entrance doors. Likewise, an apartment fire door, a coastal sliding system and a decorative heritage entrance do not belong in a single like-for-like material comparison.

Australian energy provisions are also increasing attention on the complete opening rather than the door leaf alone. According to the Australian Building Codes Board, updated residential energy provisions generally require applicable new homes to achieve the equivalent of a 7-star NatHERS rating, alongside a whole-of-home energy-use budget.

NatHERS assesses the thermal performance of a home's building shell. External doors can influence that shell through glazing, frame conductivity, seals, gaps, orientation and exposure. A material label by itself does not establish the energy performance of an installed system.

The Window Energy Rating Scheme similarly evaluates products using measures such as U-value and solar heat gain coefficient. These measures are especially relevant where glazed doors form a large proportion of the external wall opening.

Why exposure can matter more than the headline material

One anonymised Sydney case from Complete Doors Online's own service history illustrates the point without establishing a market-wide statistic. A new home's timber front door began bowing and cracking after being installed in a position receiving full sun with very little overhead protection.

After reviewing the exposure, the team recommended an aluminium entrance product rather than repeating the original material choice. The customer proceeded with the alternative and later selected the same type of product for another external opening.

This is an operational example, not evidence that aluminium is universally better than timber. It shows why orientation, shelter, colour, maintenance expectations and manufacturer warranty conditions need to be assessed before material popularity is used as a purchasing rule.

Which Door Styles and Applications Are Driving Demand?

Australian sales by entrance, internal, bifold and sliding style are not published in a complete national public dataset. Product categories can still be connected to identifiable construction and renovation applications.

• Entrance doors serve weather protection, security, energy performance and street appeal. Their specification is often more demanding than that of internal products.
• Internal doors are linked to dwelling size, room count, accessibility, acoustic privacy and interior renovation activity.
• Sliding doors are particularly relevant where floor space is constrained or where a wide glazed opening connects indoor and outdoor living areas.
• Bifold systems are used for broad openings and can suit both contemporary extensions and heritage renovations, depending on detailing and planning controls.
• Cavity sliders and other space-saving systems are relevant to apartments, bathrooms, laundries and compact floor plans.
• Door hardware is a related market affected by the number, weight, location and performance requirements of each door leaf.

The ABS dwelling-structure split provides useful context. According to the ABS, separate houses accounted for 70 per cent of occupied private dwellings at the 2021 Census. The remaining medium-density and apartment stock creates different requirements, including compact layouts, shared access, acoustic separation and fire safety.

Style data also need careful definitions. A glazed aluminium product may be counted as a sliding door, external door, window-and-door system or aluminium joinery product depending on the source. An entrance system may include sidelights, frames and hardware, while another dataset may count only the leaf. These differences prevent reliable aggregation unless the underlying definitions match.

Renovation Trends and Online Purchasing

Renovation is a major source of replacement demand because Australia's existing dwelling stock is much larger than its annual flow of new homes. Doors may be replaced as standalone items or as part of kitchens, extensions, facade updates, accessibility work and whole-home renovations.

• According to the 2024 Houzz & Home Australia study, the median amount spent on renovations completed in 2023 was $40,000. This figure covers the overall renovation, not doors alone.
• The same Houzz study reported that the upper tenth of renovating households spent substantially more than the median, with a benchmark of $300,000. Large projects are more likely to involve multiple openings, structural changes or complete internal-door schedules, although the study does not publish a door-specific allocation.
• According to the Australia Post 2025 eCommerce Report, approximately 9.8 million Australian households made an online purchase during 2024.
• Australia Post reported total Australian online spending of $69 billion during 2024, an increase of 12 per cent from the preceding year. This is an economy-wide e-commerce measure and should not be described as door revenue.
• According to Australia Post, the scale of online household participation indicates that digital research and purchasing are now established consumer behaviours rather than niche channels.

For years, buying an entrance or internal door often meant travelling from showroom to showroom. Online purchasing has changed that behaviour. For bulky building products, however, product information and logistics remain more complicated than they are for small parcels.

Accurate dimensions, product photography, lead times, delivery zones, warranty conditions and exposure guidance all affect whether someone can order with confidence from the comfort of their own home. Online transaction statistics do not remove those practical requirements.

An anonymised delivery case from Complete Doors Online's operational history illustrates the logistics issue. A builder placed an online order without realising that its normal manufacturer lead time was three to four weeks. The required site deadline was within two weeks. Coordination with the manufacturer and a courier's fortnightly Melbourne delivery run allowed the order to arrive within the required window.

The case should not be interpreted as an industry delivery benchmark or guaranteed outcome. It demonstrates why sales-channel statistics need to be read alongside supply-chain factors, particularly for oversized freight moving between states.

Australian Market Statistics and Regional Differences

Australia is not a single climatic or regulatory market. The same door system may face different solar exposure, wind, moisture, salt, temperature and bushfire conditions depending on the suburb and region in which it is installed.

• According to the Australian Building Codes Board climate-zone map, the National Construction Code recognises eight Australian climate zones, from high-humidity summer conditions to alpine conditions.
• According to the NSW Rural Fire Service, the Bushfire Attack Level framework contains six classifications: BAL-LOW, BAL-12.5, BAL-19, BAL-29, BAL-40 and BAL-FZ.
• According to the Country Fire Authority, ember attack is responsible for approximately 85 per cent of houses destroyed during bushfires. Openings, gaps and vulnerable junctions therefore matter alongside the main wall and roof materials.
• According to Standards Australia, AS 3959:2018 sets out construction requirements for buildings in bushfire-prone areas. Project teams must check the applicable edition, local planning requirements and building approval conditions.
• State and territory adoption dates and variations can affect when National Construction Code provisions apply. The Australian Building Codes Board should be read together with the relevant jurisdiction's building authority.

Bushfire benchmarks affecting external door specification

The following radiant heat benchmarks are drawn from NSW Rural Fire Service guidance for the AS 3959 Bushfire Attack Level system. They are site assessment categories, not product market shares.

Bushfire Attack Level	Radiant heat benchmark	General exposure description	Source
BAL-LOW	No specific radiant heat figure assigned	Insufficient risk to warrant specific construction requirements under AS 3959	[NSW Rural Fire Service](https://www.rfs.nsw.gov.au/plan-and-prepare/building-in-a-bush-fire-area/building-after-bush-fire/bush-fire-attack-levels)
BAL-12.5	Up to 12.5 kW/m²	Ember attack and lower radiant heat exposure	[NSW Rural Fire Service](https://www.rfs.nsw.gov.au/plan-and-prepare/building-in-a-bush-fire-area/building-after-bush-fire/bush-fire-attack-levels)
BAL-19	Up to 19 kW/m²	Increasing ember and radiant heat exposure	[NSW Rural Fire Service](https://www.rfs.nsw.gov.au/plan-and-prepare/building-in-a-bush-fire-area/building-after-bush-fire/bush-fire-attack-levels)
BAL-29	Up to 29 kW/m²	High ember and radiant heat exposure	[NSW Rural Fire Service](https://www.rfs.nsw.gov.au/plan-and-prepare/building-in-a-bush-fire-area/building-after-bush-fire/bush-fire-attack-levels)
BAL-40	Up to 40 kW/m²	Very high exposure, including increased likelihood of burning debris	[NSW Rural Fire Service](https://www.rfs.nsw.gov.au/plan-and-prepare/building-in-a-bush-fire-area/building-after-bush-fire/bush-fire-attack-levels)
BAL-FZ	More than 40 kW/m²	Direct flame exposure is possible	[NSW Rural Fire Service](https://www.rfs.nsw.gov.au/plan-and-prepare/building-in-a-bush-fire-area/building-after-bush-fire/bush-fire-attack-levels)

Regional demand should be measured using project data rather than stereotypes. Sydney and Melbourne both contain apartments, heritage suburbs, detached housing and growth corridors. Queensland contains humid coastal markets as well as inland climates. Western Australia combines metropolitan construction with long freight distances and different climate conditions.

For market analysis, state-level ABS approvals and completions provide a stronger comparison than anecdotal claims about one city preferring a particular material. A rise in Victorian approvals may signal future demand, but it does not by itself prove a rise in timber door sales. Likewise, Queensland housing starts do not establish aluminium's sales growth unless a material-specific dataset is available.

This is why the requested propositions, such as a Victorian renovation boom driving timber demand or Queensland starts driving aluminium growth, should be treated as hypotheses for further research rather than published case-study findings.

Market Outlook for 2026 and Beyond

Australia's door market outlook is tied to housing delivery, renovation budgets, product compliance, construction costs and the ability of suppliers to serve buyers across a geographically large market.

• The national policy benchmark remains 1.2 million homes over five years from July 2024, according to Housing Australia.
• Housing Australia's 2025 forecast of approximately 938,000 homes implies that demand associated with new construction may remain below the level suggested by the national target.
• The projected gap of approximately 262,000 homes highlights the difference between policy targets and likely delivery. Door-demand models should use forecast completions rather than assuming the target will be met in full.
• The 7-star NatHERS-equivalent benchmark in updated residential energy provisions is likely to keep thermal performance, seals and glazing specifications prominent in applicable new-home projects, according to the Australian Building Codes Board.
• Australia Post's finding that approximately 9.8 million households shopped online during 2024 supports continued investment across the building-products sector in digital product information, visualisation and freight transparency. It does not establish a door-specific online sales forecast.

A defensible five-year door-market forecast would require data that are not publicly available in a consistent form. These include average doors installed by dwelling type, replacement cycles, commercial project schedules, product prices, imports, local manufacturing output and material shares.

Analysts can still build scenarios. A conservative scenario can use Housing Australia's forecast completions. A policy-target scenario can use the national housing target. A renovation scenario can combine the existing dwelling base with published renovation participation and spending data. Each scenario should disclose assumptions instead of presenting a single precise forecast as fact.

Key Takeaways

• Use housing completions as the strongest public new-build proxy. Approvals are useful leading indicators, but completions are closer to the point at which doors are installed.
• Do not quote a standalone Australian door market value without checking its scope. Public and commercial reports may combine doors with windows, joinery or hardware.
• Treat material-share claims cautiously. There is no complete public national split showing the percentage of Australian sales represented by timber, aluminium, composite and steel doors.
• Separate new construction from replacement demand. Australia's approximately 10.85 million private dwellings create a large installed base independent of annual construction cycles, according to the ABS.
• Account for regional specification differences. Australia's eight National Construction Code climate zones and six Bushfire Attack Level categories show why one national product assumption may not fit every project.
• Read renovation spending correctly. Houzz's $40,000 median is a whole-renovation figure, not an average door budget.
• Expect digital research to remain important. Australia Post's online-shopping data support the channel trend, but bulky freight, lead times and accurate product information remain critical.
• Build forecasts from disclosed assumptions. Housing Australia's forecast of approximately 938,000 homes is a more cautious construction input than automatically assuming the 1.2 million-home target will be achieved.

Methodology and Disclaimer

This report was compiled from publicly available Australian government releases, building regulation resources, recognised industry research and the publisher's supplied operational context. The primary statistical base includes the ABS Census, ABS Building Approvals, ABS Building Activity, Housing Australia, the Australian Building Codes Board, NSW Rural Fire Service, Country Fire Authority, Houzz and Australia Post.

A statistic was included only where it could be tied to a named source. Door-specific figures were not inferred from combined door-and-window market reports. No national material shares, style shares, average door renovation spend or standalone door market value have been invented to fill gaps in the public evidence.

The product labels used in this report align with the broad catalogue structure maintained by Complete Doors Online. Publisher and correction details are maintained on its contact page.

Statistics sourced from publicly available research and industry reports. Verify individual figures before publishing. Building regulations, standards, product certifications and jurisdictional adoption arrangements can change. Project-specific advice should come from appropriately qualified building professionals and the relevant approval authority.

Sources

1. Australian Bureau of Statistics, 2021 Census QuickStats, Australia: https://www.abs.gov.au/census/find-census-data/quickstats/2021/AUS
2. Australian Bureau of Statistics, Housing: Census: https://www.abs.gov.au/statistics/people/housing/housing-census/latest-release
3. Australian Bureau of Statistics, Building Approvals, Australia: https://www.abs.gov.au/statistics/industry/building-and-construction/building-approvals-australia/latest-release
4. Australian Bureau of Statistics, Building Activity, Australia: https://www.abs.gov.au/statistics/industry/building-and-construction/building-activity-australia/latest-release
5. Housing Australia, State of the Housing System research: https://www.housingaustralia.gov.au/research-data-analytics/state-housing-system
6. Australian Building Codes Board, NCC residential energy efficiency provisions: https://ncc.abcb.gov.au/editions/ncc-2022/adopted/volume-two/h-energy-efficiency
7. Australian Building Codes Board, Climate Zone Map: https://www.abcb.gov.au/resources/climate-zone-map
8. Nationwide House Energy Rating Scheme, NatHERS: https://www.nathers.gov.au/
9. NSW Rural Fire Service, Bushfire Attack Levels: https://www.rfs.nsw.gov.au/plan-and-prepare/building-in-a-bush-fire-area/building-after-bush-fire/bush-fire-attack-levels
10. Country Fire Authority, Preparing property for ember attack: https://www.cfa.vic.gov.au/plan-prepare/how-to-prepare-your-property/embers
11. Standards Australia, AS 3959:2018 Construction of buildings in bushfire-prone areas: https://store.standards.org.au/product/as-3959-2018
12. Australia Post, eCommerce trends and reports: https://auspost.com.au/business/marketing-and-communications/access-data-and-insights/ecommerce-trends
13. Houzz Australia, Houzz Research: https://www.houzz.com.au/research
14. IBISWorld Australia, Australian industry research: https://www.ibisworld.com/australia/
15. Window Energy Rating Scheme: https://www.wers.net/

Frequently Asked Questions

What is the current size of the Australian door market?

There is no freely available national dataset that isolates doors from windows, joinery and related manufacturing. Quoting a combined door-and-window industry value as though it represents doors alone would overstate the available evidence.

The strongest transparent scale benchmark is Australia's housing stock. According to the ABS 2021 Census, Australia had approximately 10.85 million private dwellings. This measures the residential installed base rather than annual sales revenue.

Which door materials are most popular in Australia?

Public Australian data do not provide reliable national percentages for timber, aluminium, composite or steel door sales. Timber is established in entrance and internal applications, while aluminium is common in exposed entrance systems and glazed sliding configurations. Composite and engineered constructions address a range of stability, insulation and maintenance requirements.

The appropriate choice depends on application, exposure, climate, design, maintenance, certification and budget. A national popularity ranking cannot replace project-specific assessment.

How do renovation trends affect door sales?

Renovations generate demand when owners alter layouts, update facades, improve access, replace damaged products or connect indoor and outdoor spaces. According to the 2024 Houzz & Home Australia study, median renovation spending reached $40,000 for projects completed in 2023.

That benchmark applies to the full renovation. Houzz does not identify an average door allocation, so it should not be presented as typical spending on doors.

What are the key drivers of door market growth in Australia?

The most important measurable drivers are dwelling completions, renovation activity, commercial construction and the condition of existing building stock. Energy provisions, bushfire requirements, accessibility, security and weather exposure influence which products are specified.

Online purchasing is another channel factor. According to Australia Post, approximately 9.8 million Australian households shopped online during 2024. This demonstrates broad digital purchasing participation, although it does not measure online door sales separately.

Are there regional differences in door purchasing habits?

Yes, but the differences should not be reduced to unsupported city-level material rankings. According to the Australian Building Codes Board, Australia has eight climate zones. Bushfire classifications add another layer of regional specification in affected areas.

Housing type also matters. Apartment construction can increase demand for fire-rated and acoustic entrance systems, while detached housing may support larger internal schedules and more outdoor access points. State-level ABS approvals and completions are the best public indicators for comparing construction pipelines.

What is the forecast for the Australian door market over the next five years?

No public forecast isolates Australian door revenue or unit sales over a five-year period. Housing Australia's projection of approximately 938,000 homes during the national target period provides a useful new-construction indicator. The projection remains below the national target of 1.2 million homes.

A complete door-market forecast would also need renovation participation, replacement cycles, project mix, imports, local manufacturing, prices and average door schedules. Forecasts that omit those variables should be labelled as scenarios rather than precise market predictions.