Black Friday early access opens Wednesday 25 November for our email list: a free fuel voucher up to $100 on orders from $1,500. Trade accounts: a free Roberta pull with every entrance door over $1,000, plus a fuel voucher up to $100 on orders from $1,500. Early access is open: a free fuel voucher up to $100 on orders from $1,500. Bay Breeze 2-in-1 doors 10% off. Bay Breeze 2-in-1 doors 10% off. Black Friday opens to everyone on Friday 27 November: a free fuel voucher on orders from $1,500. Black Friday sale, on now: a free fuel voucher up to $100 on orders from $1,500. Bay Breeze 2-in-1 doors 10% off. Free stainless steel Roberta pull with every entrance door over $1,000. Last orders for Christmas: Friday 11 December, on doors with a 7 to 9 working day lead time. Free stainless steel Roberta pull with every entrance door over $1,000.

New: collect from your nearest Mainfreight depot, from $225. How depot collection works

Trade pricing on every door, no minimums. Apply in a minute

Clearance: doors and hardware marked down while stock lasts. See the sale

2-in-1 Front Doors in Australia: How an Entry Door With a Built-In Security Screen Works, and Who It Suits

Australian home entry with a security screen door closed over an open solid front door

Mark Smith |

A 2-in-1 front door is an entry door and a security screen door built into one shared frame. You open the solid door for access and leave the screen closed for airflow and insect protection, without bolting a separate screen to your existing frame. Fitted properly, the two leaves look like one design.

You want the breeze coming through the house on a warm evening. You also want the front door locked, or at least not wide open to every stray insect and passer-by. Plenty of homes solve this with a screen door added years after the entry door, and it often shows.

A 2-in-1 door solves it at the design stage. We've created this simple guide to help you understand how the combination works, who it suits, what to measure and what to check before you order with confidence.

Key takeaways

  • A 2-in-1 front door puts the entry door and the security screen in one frame, so the two are designed to work together.
  • The screen gives you airflow and insect protection with the solid door open. The solid door gives you privacy, weather protection and security when it's closed.
  • Mesh type, lock quality and whether the screen is tested to AS 5039 decide how secure the screen really is.
  • Measuring accurately and checking swing direction, threshold and frame depth matters more than any other step.
  • Bushfire-prone sites have extra rules. Check with your certifier before you choose any door and screen combination.

Summary: 2-in-1 Door vs Separate Door Plus Retrofit Screen

Feature 2-in-1 door Entry door plus retrofit security screen
Frame One shared frame for both leaves Screen has its own frame, fixed over or into the existing frame
Look Designed as a matched set Depends on how well the screen suits the existing door and facade
Airflow Open the solid door and keep the screen closed Same result, if the screen fits well
Security Depends on mesh, locks and tested construction Depends on the same factors, plus how well the screen is fixed to the existing frame
Installation One opening, one installation job Screen installed after the door, often as a separate job
Measuring Measure the entry opening once Measure the existing frame and work around its quirks

What Is a 2-in-1 Front Door?

A 2-in-1 front door combines a solid entry door and a hinged security screen in one frame. You get two leaves in one opening: the screen on the outside and the entry door behind it. The aim is one tidy product instead of two products that were never designed to meet.

People search for this under a few names. You'll see "door and screen combo", "2 in 1 door and screen", "front door with built in security screen" and "front door with flyscreen". They all describe the same idea, though the mesh in the screen leaf can differ a lot. A flyscreen stops insects. A security screen is built to resist forced entry as well.

You can browse our 2-in-1 doors collection to see how the range looks.

If you're happy with your existing door and only want a screen, a separate hinged security door may suit you better. Our SupaScreen hinged security doors and Intrudaguard hinged security doors are examples of that route.

How Does the Shared Frame Work?

The shared frame holds both leaves in one set of jambs, a head and a threshold. The screen leaf and the entry leaf each hinge on their own side of the frame and close against their own rebate. That means one opening, two doors, and no screen fixed over the top of the frame.

In most layouts, the entry door swings inward and the screen swings outward. That lets you open the solid door fully, then step out through the screen. Always confirm the swing arrangement on the product page, because layouts can vary by model.

The shared frame is the real benefit. Here's why it matters:

  • Fewer gaps. Both leaves are built to the same opening, so you're not working around an old frame's wear, twist or paint build-up.
  • A cleaner look. The frame profile, finish and proportions come as a set, which helps your street appeal.
  • One installation. The installer sets one frame in one opening, then hangs both leaves.

If you want a complete package, our door systems collection is also worth a look.

What Screen Mesh Types Are Available?

Screen mesh falls into a few general groups: insect mesh, woven security mesh and perforated sheet. Insect mesh is light and keeps bugs out. Security mesh is stronger and designed to resist cutting and impact. Perforated sheet is a solid panel with small holes. Each balances visibility, airflow and strength differently.

Here's how to think about them in general terms:

  • Insect mesh (flyscreen). It does its job against flies and mosquitoes. It isn't a security product, and it shouldn't be marketed as one.
  • Woven security mesh. A tougher mesh, often stainless steel or similar, designed to resist being cut or pushed through. It's the usual choice when you want real security with good airflow.
  • Perforated security sheet. A sheet with a pattern of holes. Visibility and airflow depend on the hole pattern, and some people like the look better than woven mesh.

The mesh is only one part of a secure screen. The frame construction, the way the mesh is held in the frame and the lock all count. For a recognised benchmark, look for screens tested to AS 5039, the Australian Standard for security screen doors and security window grilles, published through Standards Australia. Ask whether the specific model you're considering is tested to it. If the answer isn't clear, get in touch with our team and we'll check the product details with you.

Who Do 2-in-1 Front Doors Suit?

A 2-in-1 front door suits homes that want regular airflow through the entry without giving up security. That usually means coastal homes, hot climates and houses with a porch or covered entry. It's less useful on a fully shaded, sealed-up entry where you'd never open the door for ventilation.

Coastal homes

Sea breezes are the whole point of living near the coast, and a screen lets you use them. Salt air is hard on metal, though. Look for corrosion-resistant mesh and finishes, and follow the manufacturer's care advice. In practice that usually means regular rinsing with fresh water. It's boring, but it's what keeps a coastal door looking good.

Hot climates

In warm areas, opening the house up in the cooler part of the day can take some pressure off the air conditioner. Your Home, the Australian Government's guide to sustainable home design, covers natural ventilation and cross-breezes in detail. A screened front door gives you one more opening for that airflow, while keeping the door lockable.

Heat also affects the door itself. Imagine a west-facing entry that gets hours of direct afternoon sun, with almost no overhang. Door material matters a lot in that situation. We'll come back to this in the insight section below.

Front porches and breezeway entries

If your front door opens onto a porch, a deck or a breezeway, a screen leaf makes that space feel like part of the house. A breezeway front door works best when there's a clear path for air to travel through the home, such as a matching opening at the rear. Without that path, the screen will keep bugs out but you won't feel much breeze.

Porch covers also protect the door from sun and rain. That's helpful for any door material, and it widens your choices.

How Do You Measure for a 2-in-1 Door?

Measure the opening width and height at three points, then check frame depth, threshold level and swing direction. Write down the smallest measurement, not the average. Measuring accurately is the single biggest factor in whether a 2-in-1 door goes in smoothly or turns into a headache.

Here's a simple checklist:

  • Width. Measure at the top, middle and bottom of the opening. Use the smallest figure.
  • Height. Measure on the left, centre and right. Again, use the smallest.
  • Wall or frame depth. Both leaves sit in one frame, so the depth has to suit the wall or the existing jamb.
  • Floor and threshold. Check the floor is level and note any step, tile or slab edge. The threshold needs a proper seat.
  • Square and plumb. Check the opening is square and the sides are plumb. Old openings often aren't.
  • Swing and handing. Stand outside, look at the door and decide where the hinges go. Note which way the entry leaf and screen leaf will open.
  • Clearance. Check there's room for the screen to swing outward past any railing, planter or wall.
  • Colour and finish. Note your existing facade colours and the finish options on the product page.

If you're replacing an existing door and frame, it helps to take photos of the opening, including the floor and the sides. For new builds, use the plans, then confirm on site.

Thinking of a different look? You can also compare options in our entrance doors collection or aluminium entrance doors.

Which Hardware Suits a 2-in-1 Door?

A 2-in-1 door needs hardware for two leaves: a lock for the screen and a lockset for the entry door. Choose handles that suit both, and check they don't clash when the screen is closed. Quality hardware affects both how secure the door is and how nice it is to use every day.

A few practical points:

  • Screen lock. The screen leaf is your first line of defence, so the lock matters. Look for a lock designed for security screens, not a light latch.
  • Entry lockset. The solid door typically takes a standard entry lock. Browse our locks and latches for options.
  • Pull handles. A pull handle on the entry door makes a strong visual statement. Check the projection so it doesn't foul the screen when both are closed. See our entrance pull handles.
  • Finish. Matching the hardware finish to the frame and screen makes the whole entry look intentional.

If you're unsure what fits what, send us the product and we'll help you pick hardware that works.

Who Installs a 2-in-1 Door?

A licensed carpenter or experienced door installer should fit your 2-in-1 door. The frame has to be plumb, square and properly fixed, or neither leaf will close well. In Sydney metro, we offer professional installation, and our preferred installer network also covers Wollongong, Melbourne, the Central Coast and the Gold Coast.

We deliver Australia-wide, so you can order from the comfort of your own home wherever you are. Outside our installer areas, a local builder or carpenter can do the job, and we're happy to talk through the product details with them.

For Sydney homeowners, see our page on professional door installation in Sydney metro.

Builders and installers can also set up a trade account with us. Questions on an upcoming job? Contact the Complete Doors Online team.

What Are the Limitations of a 2-in-1 Door?

A 2-in-1 door isn't right for every site. The main limits are bushfire-prone land, tight clearances, strata or heritage rules and the fact that a combined unit costs a decision upfront. Check each one before you order, and ask a certifier when the site has bushfire requirements.

  • Bushfire areas (BAL sites). If your block is in a bushfire-prone area, the National Construction Code (NCC), published by the Australian Building Codes Board, sets requirements based on the Bushfire Attack Level. Those requirements can limit the materials allowed for doors and screens. We stock bushfire-rated entrance doors from BAL 19 to BAL 40, but you shouldn't assume any 2-in-1 combination meets a given BAL. Speak to your certifier or council first.
  • Strata and heritage. Apartment owners corporations and heritage overlays often have rules about door appearance. Check before you commit.
  • Clearance. An outward-swinging screen needs space. Tight porches, railings and steps can get in the way.
  • Mesh isn't magic. An insect mesh will not give you security. A security mesh with a weak lock won't either.
  • View and light. Security mesh slightly reduces the view through the door. Most people stop noticing, but it's worth knowing.
  • Decide up front. You're choosing the door and screen as a package. If you love your current door, a separate security door may be the simpler route.

Being upfront about limits is part of how we work. If we think a different door suits you better, we'll say so.

Why We'd Decide on the Screen Before the Door

Most people choose the entry door first and think about the screen later. We think that's backwards. The screen changes how the whole entry looks and works, so it's smarter to decide on both together, and a 2-in-1 door lets you do that.

Here's our view, after a decade in this industry. When we started, buyers expected a big showroom. Then the showroom got quieter and online sales picked up, so about 18 months ago we closed ours and went fully online. That shift made us rethink how people make door decisions.

A screen adds a visible layer to your facade. Mesh colour, frame profile and handle position all change street appeal. That's hard to judge from a catalogue photo alone, which is why we built DoorVision. It lets you view a door on your own home before you buy, so you can see how a screen leaf sits against your brickwork or cladding.

We've also learned that material choice matters as much as the screen. Mark once spoke to a customer who had just moved into a new house in the Sydney area. The builder had fitted a cheap timber door to an entry with full sun all day and barely any overhead protection. Within a short time, the door was bowing and cracking. After a few questions, Mark recommended an aluminium door instead, and arranged an experienced local installer. The customer was so happy that they came back for a second aluminium door for the back of the house.

The lesson isn't that every entry needs aluminium. It's that you should match the door to the exposure, then add the screen. If you're not sure which way to go, send us a message with a photo of your entry and we'll talk it through.

FAQs

Is the screen on a 2-in-1 door secure?

It depends on the mesh, the frame construction and the lock. Insect mesh isn't a security product. A woven or perforated security screen with a quality lock can be. Ask whether the model you're considering is tested to AS 5039, the Australian Standard for security screen doors.

Can I retrofit a 2-in-1 door to my existing frame?

A 2-in-1 door is designed around its own shared frame, so it's normally installed as a complete unit. If you want to keep your current door, a separate hinged security door is usually the better option. Send us your measurements and photos and we'll advise.

Which way does a 2-in-1 front door swing?

Typically the entry door swings inward and the screen swings outward, but this can vary by model. Stand outside, decide where you want the hinges, and confirm the handing on the product page before you order.

Is a 2-in-1 door suitable for a bushfire area?

Not automatically. Bushfire-prone sites have requirements under the National Construction Code based on the Bushfire Attack Level. Always check with your certifier or council before choosing a door and screen combination. We stock bushfire-rated entrance doors from BAL 19 to BAL 40, but compliance depends on your site and the specific product.

How do I measure for a 2-in-1 door?

Measure the opening width and height at three points and use the smallest figure. Then check frame depth, floor level, threshold, square and plumb, swing direction and clearance for the screen. Our measuring checklist above covers each step.

Can I choose the colour of a 2-in-1 door?

Often you can, but the finishes available vary by model. Check the product page for the options, and use DoorVision to see how a colour looks on your home. If you can't see the colour you want, ask our team.

Previous Next

Not sure which door fits?

Send us the opening size, the look you are after and your postcode. The team can help with sizing, frames, glass, lead times and delivery, Monday to Friday, 9am to 5pm.